Difference between revisions of "Nvidia drivers"
| (11 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
While Redcore Linux Hardened defaults to the open source | While Redcore Linux Hardened defaults to the open source '''x11-drivers/nouveau''', it does provide three versions of the proprietary graphics driver for NVIDIA graphic cards: '''x11-drivers/nvidia-drivers:5''', '''x11-drivers/nvidia-drivers:4''', and '''x11-drivers/nvidia-drivers:3''' in its git repositories. Depending on the age of your card, you can install either of them, but only one at a time, as they cannot coexist on the same system. Some cards are supported by multiple drivers, so it is up to you if you want the latest and greatest or tried and tested. 🖥️ | ||
=Driver support= | = Driver support 🎮 = | ||
The | The '''x11-drivers/nvidia-drivers:5''' package supports the most recent cards, and you should use it if you have such a card. A list with the supported cards can be found at: [https://www.nvidia.com/Download/driverResults.aspx/213194/en-us/ https://www.nvidia.com/Download/driverResults.aspx/213194/en-us/] 📦 | ||
[https://www.nvidia. | |||
The | The '''x11-drivers/nvidia-drivers:4''' package supports recent cards and some older cards, and you should use it if you have such a card. A list with the supported cards can be found at: [https://www.nvidia.com/Download/driverResults.aspx/215840/en-us/ https://www.nvidia.com/Download/driverResults.aspx/215840/en-us/]. 📦 | ||
[https://www.nvidia.com/ | |||
The | The '''x11-drivers/nvidia-drivers:3''' package supports older cards, and you should use it if you have such a card. A list with the supported cards can be found at: [https://www.nvidia.com/Download/driverResults.aspx/196213/en-us/ https://www.nvidia.com/Download/driverResults.aspx/196213/en-us/] 📦 | ||
== Installation 🛠️ == | |||
Using [[Sisyphus|sisyphus]] (cli) - recommended: | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:5</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
x11- | acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-525.78.01 gui-libs/egl-gbm-1.1.0 gui-libs/egl-wayland-1.1.11-r1 x11-drivers/nvidia-drivers-525.78.01 x11-misc/nvidia-settings-525.78.01 | ||
Total: 6 source package(s) | |||
Would you like to proceed? [y/N] | |||
or | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:4</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
These are the | gui-libs/eglexternalplatform-1.1 acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-470.141.03-r2 gui-libs/egl-wayland-1.1.7-r1 x11-drivers/nvidia-drivers-470.141.03 x11-misc/nvidia-settings-470.141.03-r2 | ||
Total: 4 source package(s) | |||
Would you like to proceed? [y/N] | |||
or | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:3</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
Total: | acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-390.154 x11-drivers/nvidia-drivers-390.154 x11-misc/nvidia-settings-390.154 | ||
Total: 4 source package(s) | |||
Would you like to proceed? [y/N] | |||
As you can see, different versions of the driver can be installed by specifying the package [https://devmanual.gentoo.org/general-concepts/slotting/index.html SLOT]. The installation process takes care of everything, so no further action is required, except rebooting the system so it uses the new drivers. 🔄 | |||
== Uninstallation ⚙️ == | |||
If for some reason you decide the proprietary drivers are not for you and you want to revert to the open-source nouveau drivers, the uninstallation process is straightforward. | |||
Using [[Sisyphus|sisyphus]] (cli) - recommended: | |||
user@hostname ~ # <strong>sisyphus uninstall nvidia-drivers</strong> | |||
user@hostname ~ # <strong>sisyphus autoremove</strong> | |||
<strong>NOTE:</strong> Since multiple NVIDIA drivers packages cannot coexist and cannot be installed at the same time on the same system, the package [https://devmanual.gentoo.org/general-concepts/slotting/index.html SLOT] doesn't need to be specified during removal. The removal process takes care of everything, so no further action is required, except rebooting the system so it goes back | |||
to using the open-source nouveau drivers. 🔄 | |||
== Replacing drivers 🔄 == | |||
It is possible that your graphics card is supported by multiple driver packages. For example, the '''GeForce GTX 1080 Ti''' graphics card is supported by all three driver packages Redcore Linux provides. If, for some reason, one driver package is not working properly, you can try another one. | |||
First, uninstall the current driver: | |||
Using [[Sisyphus|sisyphus]] (cli) - recommended: | |||
user@hostname ~ # <strong>sisyphus uninstall nvidia-drivers</strong> | |||
user@hostname ~ # <strong>sisyphus autoremove</strong> | |||
Then, install another driver: | |||
Using [[Sisyphus|sisyphus]] (cli) - recommended: | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:5</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
These are the binary packages that would be merged, in order: | acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-525.78.01 gui-libs/egl-gbm-1.1.0 gui-libs/egl-wayland-1.1.11-r1 x11-drivers/nvidia-drivers-525.78.01 x11-misc/nvidia-settings-525.78.01 | ||
Total: 6 source package(s) | |||
Would you like to proceed? [y/N] | |||
or | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:4</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
Total: | gui-libs/eglexternalplatform-1.1 acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-470.141.03-r2 gui-libs/egl-wayland-1.1.7-r1 x11-drivers/nvidia-drivers-470.141.03 x11-misc/nvidia-settings-470.141.03-r2 | ||
Total: 4 source package(s) | |||
Would you like to proceed? [y/N] | |||
or | |||
user@hostname ~ # <strong>sisyphus install --ebuild nvidia-drivers:3</strong> | |||
These are the binary packages that would be merged, in order: | |||
x11-libs/gdk-pixbuf-xlib-2.40.2 | |||
Total: 1 binary package(s) | |||
These are the source packages that would be merged, in order: | |||
acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-390.154 x11-drivers/nvidia-drivers-390.154 x11-misc/nvidia-settings-390.154 | |||
Total: 4 source package(s) | |||
Would you like to proceed? [y/N] | |||
Once completed, reboot your system so it uses the new drivers. 🔄 | |||
=Nvidia Prime= | = Nvidia Prime 🎮 = | ||
PRIME is a technology used to manage hybrid graphics found on recent desktops and laptops (Optimus for NVIDIA, AMD Dynamic Switchable Graphics for Radeon). PRIME GPU offloading is an attempt to support muxless hybrid graphics in the Linux kernel. Redcore Linux supports PRIME for NVIDIA Optimus through | PRIME is a technology used to manage hybrid graphics found on recent desktops and laptops (Optimus for NVIDIA, AMD Dynamic Switchable Graphics for Radeon). PRIME GPU offloading is an attempt to support muxless hybrid graphics in the Linux kernel. Redcore Linux supports PRIME for NVIDIA Optimus through '''x11-misc/nvidia-prime''' package, using proprietary '''x11-drivers/nvidia-drivers:4''' and '''x11-drivers/nvidia-drivers:5''' driver packages. At the time of this article, AMD Dynamic Switchable Graphics is not supported, due to a lack of hardware to implement and test. 🖥️ | ||
==Installation== | == Installation 🛠️ == | ||
PRIME doesn't work with | PRIME doesn't work with '''x11-drivers/nvidia-drivers:3''' driver package, so if you have an NVIDIA card only supported by that driver, you're out of luck. First, install '''x11-drivers/nvidia-drivers:4''' or '''x11-drivers/nvidia-drivers:5''' as shown above. Then install '''x11-misc/nvidia-prime''': | ||
Using [[Sisyphus|sisyphus]] (cli) - recommended: | Using [[Sisyphus|sisyphus]] (cli) - recommended: | ||
| Line 96: | Line 162: | ||
root # <strong>sisyphus install nvidia-prime</strong> | root # <strong>sisyphus install nvidia-prime</strong> | ||
These are the binary packages that would be merged, in order: | |||
x11-misc/nvidia-prime-314 | |||
Total: 1 binary package(s) | |||
Would you like to proceed? [y/N] | |||
Once installed, you can launch applications on the more | Once installed, you can launch applications on the more powerful NVIDIA card using: | ||
prime-run <application_name> | prime-run <application_name> | ||
| Line 112: | Line 178: | ||
prime-run steam | prime-run steam | ||
=Final thoughts= | = Final thoughts 💭 = | ||
NVIDIA driver support is slightly different in Redcore Linux compared to its parent Gentoo Linux. Gentoo Linux provides | NVIDIA driver support is slightly different in Redcore Linux compared to its parent Gentoo Linux. Gentoo Linux provides great documentation at [https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers] if you want to read more. Though, keep in mind, all those steps are not needed in Redcore Linux. 🐧 | ||
Latest revision as of 11:17, 23 November 2023
While Redcore Linux Hardened defaults to the open source x11-drivers/nouveau, it does provide three versions of the proprietary graphics driver for NVIDIA graphic cards: x11-drivers/nvidia-drivers:5, x11-drivers/nvidia-drivers:4, and x11-drivers/nvidia-drivers:3 in its git repositories. Depending on the age of your card, you can install either of them, but only one at a time, as they cannot coexist on the same system. Some cards are supported by multiple drivers, so it is up to you if you want the latest and greatest or tried and tested. 🖥️
Driver support 🎮
The x11-drivers/nvidia-drivers:5 package supports the most recent cards, and you should use it if you have such a card. A list with the supported cards can be found at: https://www.nvidia.com/Download/driverResults.aspx/213194/en-us/ 📦
The x11-drivers/nvidia-drivers:4 package supports recent cards and some older cards, and you should use it if you have such a card. A list with the supported cards can be found at: https://www.nvidia.com/Download/driverResults.aspx/215840/en-us/. 📦
The x11-drivers/nvidia-drivers:3 package supports older cards, and you should use it if you have such a card. A list with the supported cards can be found at: https://www.nvidia.com/Download/driverResults.aspx/196213/en-us/ 📦
Installation 🛠️
Using sisyphus (cli) - recommended:
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:5
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-525.78.01 gui-libs/egl-gbm-1.1.0 gui-libs/egl-wayland-1.1.11-r1 x11-drivers/nvidia-drivers-525.78.01 x11-misc/nvidia-settings-525.78.01
Total: 6 source package(s)
Would you like to proceed? [y/N]
or
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:4
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
gui-libs/eglexternalplatform-1.1 acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-470.141.03-r2 gui-libs/egl-wayland-1.1.7-r1 x11-drivers/nvidia-drivers-470.141.03 x11-misc/nvidia-settings-470.141.03-r2
Total: 4 source package(s)
Would you like to proceed? [y/N]
or
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:3
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-390.154 x11-drivers/nvidia-drivers-390.154 x11-misc/nvidia-settings-390.154
Total: 4 source package(s)
Would you like to proceed? [y/N]
As you can see, different versions of the driver can be installed by specifying the package SLOT. The installation process takes care of everything, so no further action is required, except rebooting the system so it uses the new drivers. 🔄
Uninstallation ⚙️
If for some reason you decide the proprietary drivers are not for you and you want to revert to the open-source nouveau drivers, the uninstallation process is straightforward.
Using sisyphus (cli) - recommended:
user@hostname ~ # sisyphus uninstall nvidia-drivers
user@hostname ~ # sisyphus autoremove
NOTE: Since multiple NVIDIA drivers packages cannot coexist and cannot be installed at the same time on the same system, the package SLOT doesn't need to be specified during removal. The removal process takes care of everything, so no further action is required, except rebooting the system so it goes back to using the open-source nouveau drivers. 🔄
Replacing drivers 🔄
It is possible that your graphics card is supported by multiple driver packages. For example, the GeForce GTX 1080 Ti graphics card is supported by all three driver packages Redcore Linux provides. If, for some reason, one driver package is not working properly, you can try another one.
First, uninstall the current driver:
Using sisyphus (cli) - recommended:
user@hostname ~ # sisyphus uninstall nvidia-drivers
user@hostname ~ # sisyphus autoremove
Then, install another driver:
Using sisyphus (cli) - recommended:
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:5
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-525.78.01 gui-libs/egl-gbm-1.1.0 gui-libs/egl-wayland-1.1.11-r1 x11-drivers/nvidia-drivers-525.78.01 x11-misc/nvidia-settings-525.78.01
Total: 6 source package(s)
Would you like to proceed? [y/N]
or
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:4
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
gui-libs/eglexternalplatform-1.1 acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-470.141.03-r2 gui-libs/egl-wayland-1.1.7-r1 x11-drivers/nvidia-drivers-470.141.03 x11-misc/nvidia-settings-470.141.03-r2
Total: 4 source package(s)
Would you like to proceed? [y/N]
or
user@hostname ~ # sisyphus install --ebuild nvidia-drivers:3
These are the binary packages that would be merged, in order:
x11-libs/gdk-pixbuf-xlib-2.40.2
Total: 1 binary package(s)
These are the source packages that would be merged, in order:
acct-user/nvpd-0 sys-kernel/nvidia-drivers-dkms-390.154 x11-drivers/nvidia-drivers-390.154 x11-misc/nvidia-settings-390.154
Total: 4 source package(s)
Would you like to proceed? [y/N]
Once completed, reboot your system so it uses the new drivers. 🔄
Nvidia Prime 🎮
PRIME is a technology used to manage hybrid graphics found on recent desktops and laptops (Optimus for NVIDIA, AMD Dynamic Switchable Graphics for Radeon). PRIME GPU offloading is an attempt to support muxless hybrid graphics in the Linux kernel. Redcore Linux supports PRIME for NVIDIA Optimus through x11-misc/nvidia-prime package, using proprietary x11-drivers/nvidia-drivers:4 and x11-drivers/nvidia-drivers:5 driver packages. At the time of this article, AMD Dynamic Switchable Graphics is not supported, due to a lack of hardware to implement and test. 🖥️
Installation 🛠️
PRIME doesn't work with x11-drivers/nvidia-drivers:3 driver package, so if you have an NVIDIA card only supported by that driver, you're out of luck. First, install x11-drivers/nvidia-drivers:4 or x11-drivers/nvidia-drivers:5 as shown above. Then install x11-misc/nvidia-prime:
Using sisyphus (cli) - recommended:
root # sisyphus install nvidia-prime
These are the binary packages that would be merged, in order:
x11-misc/nvidia-prime-314
Total: 1 binary package(s)
Would you like to proceed? [y/N]
Once installed, you can launch applications on the more powerful NVIDIA card using:
prime-run <application_name>
Examples:
prime-run steam
Final thoughts 💭
NVIDIA driver support is slightly different in Redcore Linux compared to its parent Gentoo Linux. Gentoo Linux provides great documentation at https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers if you want to read more. Though, keep in mind, all those steps are not needed in Redcore Linux. 🐧
